Environmental Policy

Just as we pursue zero defects in quality,

we strive for zero pollution in the environment,

pursue zero emissions in recycling,

and achieve green sustainable development.

Our ESG Goals

From raw material procurement from suppliers to production and processing, we consistently implement our energy-saving and low-carbon strategy.

Increase Green Electricity Consumption

Cumulative Reduction In Carbon Dioxide Emissions In 202335.112 Tons

In 2023, a total of 3,200 tons of aluminum alloy were produced, reducing carbon emissions by approximately 0.0109 kg per kilogram.

Cumulative Reduction In Carbon Dioxide Emissions By 202458.3 Tons

In 2024, Xunhui Factory's total electricity consumption reached 660,000 kilowatt-hours, a 5% decrease compared to the previous year.

Supplier Carbon Footprint

The current carbon footprint of Xunhui Raw Material Suppliers is 1.332kg CO₂ e/kg Al
The supplier will reduce its carbon footprint to zero by 2030 through a series of measures 0.78 kg CO₂ e/kg Al

2030 Carbon Footprint Equivalent

kg CO₂ e/kg Al

Increase the proportion of recycled aluminum purchased while reducing the proportion of primary aluminum ingots purchased.

Simultaneously, by modifying the composition, dosage, and refining time of the refining agent in the process,

the use of recycled aluminum can be expanded.

50%
Primary Aluminum Ingot

50%
Renewable Aluminum

Achieved raw material targets in 2020:

50% primary aluminum ingots, 50% recycled aluminum

30%
Primary Aluminum Ingot

70%
Renewable Aluminum

Achieve raw material composition by 2025:

30% primary aluminum ingots, 70% recycled aluminum

20%
Primary Aluminum Ingot

80%
Renewable Aluminum

Achieve raw material targets by 2030:

20% primary aluminum ingots, 80% recycled aluminum

Enable Photovoltaic Power Supply

Photovoltaic system to be commissioned in June 2024, with an estimated reduction of 26.75 metric tons of carbon dioxide.

Reduction In Carbon Dioxide Emissions

Tons

Production Equipment Modification

Modify the melting furnace to enhance its heat retention and reduce heat emissions. Simultaneously, install waste heat recovery equipment to minimize heat loss.

Reduction In Carbon Dioxide Emissions

Tons

Use Low-energy Machinery

Low-energy air compressors are being deployed, replacing high-energy-consumption motors.

After replacing the low-efficiency air compressors,

annual electricity consumption will decrease from 3.11 million kWh to 2.96 million kWh.

Reduction In Carbon Dioxide Emissions

Tons Per Year

Vehicle AndSupplier Management

Supplier Management

Existing suppliers will be required to reduce their carbon dioxide emissions to meet the excellent emission standards. For potential suppliers, carbon emissions will be incorporated into the evaluation criteria.